Yaqin:NEWS
Location: Home > Frequently asked questions > Can you introduce the combined amplifier and the front and back stage amplifier?

Can you introduce the combined amplifier and the front and back stage amplifier?

release time: 2021.04.22
Summary: 
The combined amplifier has the following characteristics

The combined amplifier has the following characteristics

Can you introduce the combined amplifier and the front and back stage amplifier?

1. The pre signal amplification and the post amplifier amplification are placed in one cabinet. Users only need to connect the external sound source and the speaker to make it sound, which is convenient to use;


2. The combined amplifier is a multi-functional integrated amplifier with the control functions of multiple sound source input selection, volume and tone;


3. The front and back stage amplifiers are designed to put the front small signal amplifier and the back stage power amplifier in different chassis respectively, and connect them through special connecting lines outside. The front and back stage amplifiers can not be used independently, but can only be used together;


4. The structure, distribution and material consumption of the front and rear stage split amplifier are more reasonable. Because the front and rear stages have their own independent chassis, power supply and control system, the mutual interference can be minimized, and the grade is higher than that of the combined amplifier, and the price may be much higher.


            

Hot product recommendation 

MS-90B

MS-90B

Output Power:UL55W×2(8Ω)   TL28W×2(8Ω) Frequency Response:5Hz--70KHz(-2dB) Distortion:≤0.8% SNR:≥90dB(A) Input Sensitivity:Intergrated:≤250mV  Maximum Power Consumption:≤390VA Tube:KT88-EH x 4  6N8P  or 6SN7 x 4     12AX7 /ECC83x 2
MS-77T

MS-77T

Output power: 40W + 40W (8Ω) Distortion: ≤0.5% (1KHz) Frequency response: 5Hz -68kHz Signal-to-noise ratio: ≥88dB (A weighting) Input sensitivity: ≤0.23V (1KHz) Electronic tube: 7027B × 4 6J1 × 8 Load impedance: 4Ω-8Ω Power consumption: about 250W
MS-34D

MS-34D

Output Power:32W×2(8Ω) Frequency Response:10Hz--70KHz(-2dB) Input Sensitivity:Intergrated:≤300mV Maximum Power Consumption:≤250W Tube:EL34 x 4  12AU7 x 2          12AX7 x 1  6Z4 x 1 Gross Weight:about 25.5 kg Net Weight:about 23 kg Size:(W)400mm(D)355mm(H)220mm
MS-34B

MS-34B

Output Power:UL38W×2(8Ω) Frequency Response:10Hz--48KHz(-2dB) Distortion:≤1.0% SNR:≥90dB(A) Input Sensitivity:Intergrated:≤260mV Maximum Power Consumption:≤250W Tube:EL34 x 4  6N8P x 2 6N9P x 1   Gross Weight:about 25.5 kg Size:(W)400mm(D)355mm(H)220mm
MS-20B

MS-20B

Output Power: 25W+25W (8Ω) three-pole (TR) connection    50W+50W (8Ω) ultra-linear (UL)  connection Frequency response: 5Hz-80KHz (-2dB)  Distortion: ≤0.5% (at 35W)  Signal to noise ratio: ≥91dB (A) Input sensitivity: combined type&nbs
MC-100B

MC-100B

Output Power: 25W+25W (8Ω) three-pole (TR) connection    50W+50W (8Ω) ultra-linear (UL)  connection Frequency response: 5Hz-80KHz (-2dB)  Distortion: ≤0.5% (at 35W)  Signal to noise ratio: ≥91dB (A) Input sensitivity: combined type ≤ 0.25V Maximum power consumption: ≤370W  Electronic tube: KT88×4 6N8P×4 12AX7B×2  Gross weight: about 31 kg
  MS-84L

  MS-84L

Output power: 2x12W (4Ω-8Ω)  Harmonic distortion: ≤2%  Signal to noise ratio: ≥80db (A)  Frequency response: 6HZ-90KHz  Input sensitivity: 250mV  Input signal level: ≤300mv  Maximum power consumption: ≤90W  Tube: 6P14*4 12AX7B*2
MC-13S

MC-13S

Output power: 40W + 40W (8Ω)  Distortion: ≤0.9%(28W)  Frequency response: 10Hz -76KHz (-2dB)  Signal to noise ratio: ≥85dB (A weighting)  Power consumption: ≤220W  Sensitivity: ≤0.26V  Electronic tube: EL34×4 or 6CA7T×4 12AT7×4  Gross weight: 22Kg  Volume: length 470mm × width 315mm × height 175mm

Contact Yaqin

  • mobile phone:0757-81102208
  • QQ:3607877004
  • mailbox:3607877004@qq.com
  • address:6th floor, No.4 Badou Road, Lijia Industrial Zone, Shang'an, Danzao Town, Nanhai District, Foshan City, Guangdong Province
二维码
二维码

二维码

咨询热线
0757-81102208
网站首页
返回顶部